California Code of Regualtions Title 8 Section 3233

(a) Ramps used for industrial purposes only shall conform to the provisions of this section. (Title 24, Part 2, Section 2-3306(j)(1).)

(b) Ramps shall be not less than two feet wider than the widest vehicle using the ramp. (Title 24, Part 2, Section 2-3306(j)(2).)

(c) The slope of a ramp shall not exceed 1 vertical to 8 horizontal.

EXCEPTION: The slope of ramps used by powered industrial trucks only shall not exceed 1 vertical to 3 horizontal. (Title 24, Part 2, Section 2-3306(j)(3).)

(d) Ramps having slopes exceeding 1 vertical to 15 horizontal shall have handrails or stair rails as required for stairways, except that intermediate stair rails shall not be required. (Title 24, Part 2, Section 2-3306(j)(4).)

(e) Ramps more than 30 inches above the adjacent ground or floor shall be provided with guardrails as required in Section 3210 and handrails as required in (d) above. Such guardrails shall be continuous from the top of the ramp to the bottom of the ramp.

EXCEPTION: Guardrails or stair rails will not be required on ramps used only by powered industrial trucks. (Title 24, Part 2, Section 2-3306(j)(5).)

(f) Industrial ramps shall have a curb or equivalent installed along the open side or sides, the curb shall not be less than 8 inches in height and shall be so designed as to prevent the truck wheel from running off of the ramp. (Title 24, Part 2, Section 2-3306(j)(6).)

(g) The surface of ramps shall be roughened or shall be of nonslip materials. (Title 24, Part 2, Section 2-3306(j)(7).)

(h) Ramps shall be maintained reasonably clear and in good repair.

NOTE: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code; and Section 18943(c), Health and Safety Code.

HISTORY

1. New section filed 6-20-75; effective thirtieth day thereafter (Register 75, No. 25).

2. Amendment filed 7-16-76; effective thirtieth day thereafter (Register 76, No. 29).

3. Amendment filed 5-25-83; effective thirtieth day thereafter (Register 83, No. 22). Approved by State Building Standards Commission 1-24-83.

Altam ramps are fabricated to ensure safety and performance. “x3 of your heaviest forklift capacity that you will be using”.

In Example if your forklift capacity is 6000lbs you would x (multiply by) 3 = 18,000lbs Capaity ramp would be required which we fabricate to a min of 20,000lbs. 

By using this formula we can detemrine the thickness of material used in our cross members, along with adding any reinfocements necessary to based of a 2:1 safety factor. Altam fabricates custom capacities upon request.

Steel is the way to go!

Here are the key benefits you’ll enjoy by choosing a dock yard ramp as opposed to a concrete ramp.

1. No Permits Required
2. Pre-Built and ready to install once it arrives
3. Cost Effective 
4. Moves with you 

If you relocate as your business continues to grow a dock access ramp should be looked at as an investment that you can take with you anywhere you go.

Temporarily renting your warehouse space?

Save the headaches, get a steel ramp and dont involve contractors, permits, landowner and down time. 

Advantages of  Grating

1. Maximize traction for loading and unloading

2. “Self cleaning” – The open design eliminates snow, dirt, water and debris, making it robust in any weather.

3. Durable, and long lasting if the right ramp capacity, length and incline as used. 

4.  Asthetics versus using diamond plate 

Serrated or Smooth?

There are two different type of grating used for forklift ramps : Smooth or Serrated Grating depending on your operation we can help design and fabricate the right dock yard ramp for your business.  

Full width or partial width

You can contact via email Fernando@altammfg.com or if you’d like to give me a call or text via 866-650-7653. I’m here to help and assist in anyway possible to ensure that you get the right ramp for your facility or operation.